I-Shaped Cold Drawn Bright Bars

Since over the years of mastery in this industry we at Shri Bhagavati Bright Bars Limited are manufacturing the shaped space bars in any shape, size and grade as per the customers specification and requirement.

Spacer Bar is available in coil form as well as in straight length as per Customer’s requirement. SBBBL offers Customized Solutions to Manufacture & Supply Products as per the customer’s Designs & Drawings.

SBBBL can manufacture Spacer Bar according to IS 6603:2001, in small and medium diameters according to Customer’s specific requirements.

It is also known as I-Beam or I-Section or I-profile or Vent Spacer.

The bar manufactured by SBBBL provides ingenious quality, high durability & superior design. 

Types of Edges:
  • Chamfered Edge,
  •  Round Edge,
  •  Sharp Edge,
  •  Damru Shape (Hand Drum)

Other types of Edges can also be made available on order.

Yes ! I am Interested

T Shape Cold Drawn Bright Bar

Shri Bhagavati Bright Bars Limited is a manufacturer of T-Shape Cold Drawn Bright Bar or Wire in materials of Carbon Steel Grades like EN8D, EN9, SAE 1010 series, 1030 series, 1040 series, 1050 series, Alloy Steel Grades, Stainless Steel Grades in AISI 200, 300 & 400 series, or desired by customer up to cross section of 32mm x 32mm.

Various Types of T-Shape: Small T, Big T, Middle T

Advantage of T-Shape Bright Bar: 
  • Ready to use
  • Reduced machining cost
  • Reduced processing time
  • Getting required corners & edges 
  • Getting Close Tolerance
  • Bright Surface 
  • Bright Finish

Thickness: 1mm- 30.00 mm in required Edges.
Width: 2.00 mm - 45.00 mm.

Yes ! I am Interested

Y Shape Cold Drawn Bright Bar

Shri Bhagavati Bright Bars Limited is having mastery in manufacturing Y-Shape Cold Drawn Bright Bar/ Wire in any Size & Grade as per Customer’s Specifications & Requirement.

Y-Shape is available in coil form as well as in straight length as per Customer’s Designs and Drawings to reduce machining time, labor cost, getting close to tolerance etc.

Yes ! I am Interested

Cold Drawn Tear Drop Shaped Bright Bars

On the basis of today’s era we at Shri Bhagavati Bright Bars Limited are setting up wide range of Cold Drawn Tear Drop Shaped Bright Bars from high grade and prime quality raw materials as per the Customer’s Specifications.

Advantage of Cold Drawn Tear Drop Shaped Bright Bar:
  • Saves costs by reducing machining steps, machining time, while improving yields and productivity.
  • It is widely known for its durability, quality & is available at competitive prices.
We make various sizes as per customers requirement and some of them are as followed:
  • 11.1 x 11.1 x 7.45
  • 13 x 13 x 9 x 0.5
  • 15 x 15 x 9.9 x 0.5
Yes ! I am Interested

One Side Up Nut Profile Bright Bar

We at Shri Bhagavati Bright Bars Limited are engaged with the quality basis terms with the prime steel sourced from the mills  such as RINL-VSP, JSW, PANCHMAHAL, etc.

And thus as per quality basis we are manufacturing One Side Up Nut Profile as per Customer’s requirement in different Grades & customised Sizes.

It can be made available in Straight Length & also in Coil Form.

Advantage:
  • Ready to use
  • Reduced machining cost
  • Reduced processing time
  • Getting required corners & edges 
  • Getting Close Tolerance
  • Bright Surface 
  • Bright Finish
Yes ! I am Interested

D Shape Bright Bar

The top-of-the-line range of D Shape Bright Bar manufactured by us is extensively used in manufacturing different automotive, agriculture & locking components. D Shape Bright Bar is made available as per drawing & specific requirement of customer. 

Hardness: as per requirement

Tolerances: Normally in h11 or as per requirement of Customer.

Length: Multiple Length and/or Fixed Length as per Customer’s requirement with balance random length.

We currently manufacture & supply D Shape Bright Bar with Various Types of Edges as followed: Chamfered Edge, Round Edge and Sharp Edge. Other Types of Edges can also be made available on order.

Yes ! I am Interested

Right Angle Profile Bright Bar

Shri Bhagavati Bright Bars Limited is having a wealth of Experience in producing RIGHT ANGLE BRIGHT BAR in any Size and Grade and from basic raw material of Wire Rod.

SBBBL can offer it made from Carbon Steel, Free Cutting Steel, Medium Carbon Steel, Alloy Steel, Stainless Steel and Non Ferrous Material.

It can be made available in Straight Length and also in Coil Form and as per Customer’s specific requirement through Designs & Drawings.

Advantages of Right Angle Bright Bar:
  • Ready to use
  • Reduced machining cost
  • Reduced processing time
  • Getting required corners & edges 
  • Getting Close Tolerance
  • Bright Surface 
  • Bright Finish
Yes ! I am Interested

Bulb Profile Bright Bar

Bright Bar Bulb Profile is the latest in our line of custom made bars developed for special purpose needs. We hold the expertise to manufacture items which can significantly reduce the machining and labor cost, thus decreasing the inventory turnover cycle.

Such expertise can serve the diverse needs of new age industrial applications in automobile, renewable energy, electronics, agriculture, etc sectors.

We manufacture such bars from Prime-ultra ok steel sourced from mills such as RINL-VSP, JSW, PANCHMAHAL, etc.

Yes ! I am Interested

Orthopedic Profile Bright Bar

Introducing the Orthopaedic Bright Bar Profile made specifically to serve the needs of Surgical Instrument makers and ensure quality material is used in the healthcare sector in India. 

SBBBL can provide such bars in custom sizes and in required Stainless Steel grades.

Yes ! I am Interested

Triangle Bright Bars

As having wide experience in the fields of Customising Bright Bars we at Shri Bhagavati Bright Bars Limited are manufacturing Chamfer Bar/Chamfer Steel / Wires in the form of wires & in straight length in Carbon Steel and Low Carbon Steel, also can be possible in Stainless steel as desired by customer

Other grades can be customised on request as followed: Free Cutting Steel, Alloy Steel, Bearing Steel and Stainless Steel or as per Customer’s specific requirement.

Yes ! I am Interested

Trapezoid Triangle Bright Bar

Shri Bhagavati Bright Bars Limited based at Shapar, Rajkot is engaged in the manufacturing of Trapezoid Triangle Bright Bars/Wires in different Shapes, Sizes and Grades such as Carbon Steel, Low Carbon Steel, Free Cutting Steel, Alloy Steel, Bearing Steel and Stainless Steel or as per Customer’s specifications & requirements.

 It can be made available in the form of wire or in Straight Length.

We currently manufacture & supply Trapezoid Triangle Bright Bar with Various Types of Edges as followed: Round Edge, Sharp Edge and Bevel Edge, Other Types of Edges can also be made available on order.

Yes ! I am Interested

Isosceles Triangle Bright Bar

Shri Bhagavati Bright Bars Ltd is manufacturing Isosceles Triangle Bright Bars/Wires in different Sizes and Grades such as Carbon Steel, Low Carbon Steel, Free Cutting Steel, Alloy Steel, Bearing Steel and Stainless Steel or as per Customer’s specifications & requirements.

It can be made available in the form of wire or in Straight Length.

Yes ! I am Interested

Triangle Profile Bright Bar

As the highest build up of Customised Bright Bars we at Shri Bhagavati Bright Bars Ltd is manufacturing Triangle Profile Bright Bars in different Sizes, Grades, Base raw material and Length as per Customer’s Specifications & Requirements.

During production, continuous inspections are applied in order to achieve highly accurate dimensions and desired edge forms. Our expertise in manufacturing Triangle Profile Bright Bar has been developed after years of painstaking research, countless experiments with Cold Rolling and Cold Drawing operations and studying numerous feedbacks given by our customers. The product hence developed makes SBBBL one of the only assured suppliers of Triangle Profile Bright Bar in entire India with assured quality and timely service delivery.

Yes ! I am Interested

Half Round Bright Bar

Shri Bhagavati Bright Bars Limited is manufacturing Half Round Bright Bar in various Sizes and Grades as per Customer’s Specifications & Requirement.

Half Round Bright Bar is available in coil form as well as in straight length.

Basic Raw material procured From Prime Wire Rod of basic steel manufacturer VSP(RINL), MUKAND, PANCHMAHAL, JSW, NECO JAISWAL, BHUSHAN, INDIA STEEL.

Tolerance: Normally in h11 or as per requirement of customer.

Length: Multiple Length and/or Fixed Length as per Customer’s requirement with balance random length.

Types of Edges: Rounded Edge

 

PRODUCT CODE

SIZE DESCRIPTION ( IN MM)

 

SIZE ( IN MM)

WIDTH

HEIGHT

BBHR6

6

3

6 X 3

BBHR121

12

6

12 X 6

BBHR122

12.7

6

12.7 X 6

BBHR13

13

5

13 X 5

BBHR14

14.2

6

14.2 X 6

BBHR15

15

6.45

15 X 6.45

BBHR161

16

7

16 X 7

BBHR162

16

8

16 X 8

BBHR18

18

9

18 X 9

BBHR19

19

9.1

19 X 9.1

BBHR211

21

9.2

21 X 9.2

BBHR12

21

9

21 X 9

BBHR24

24.9

9.5

24.9 X 9.5

BBHR29

29.1

13.4

29.1 X 13.4

BBHR30

30

15

30 X 15

 

Yes ! I am Interested

Feather Edged Convex Steel Bars

Shri Bhagavati Bright Bars Limited is engaged in manufacturing of Feather Edged Convex Steel Bars from prime basic raw material of wire rod.

Feather Edged Convex Steel Bright Bars is manufactured according to customer’s specifications.

During production, continues inspections are applied in order to achieve highly accurate dimensions and requested edge forms.

Hardness: as per requirement

Tolerances: Normally in h11 or as per requirement of Customer.

Length: Multiple Length and/or Fixed Length as per Customer’s requirement with balance random length

Surface: Surface quality like Bright, Galvanized and smoothness is achieved by our special production techniques.

Types of Edges: Sharp Edge

Yes ! I am Interested

Quarter Round Flat Bright Bar

Shri Bhagavati Bright Bars Ltd. is manufacturing Quarter Round Flat Bright Bar from basic prime raw material such as Carbon Steel, Low Carbon Steel, Free Cutting Steel, Alloy Steel, Bearing Steel and Stainless Steel or as per Customer’s specifications & requirements.It can be made available in the form of wire or in Straight Length.

Sizes developed by us  as per customers requirement are as available:

  • 20 x 10
  • 25 x 10
  • 35 x 10 
Yes ! I am Interested

Double Side Taper Flat Bright Bar

Shri Bhagavati Bright Bars Limited can develop Double Side Taper Flat Bright Bar which gives immense Benefits and Advantages as followed: Saving of Machining &Tooling cost Saving Labour Costs Reduction of Waste during manufacturing Saving of Time Ready for Production Set up/ ready To Use Low Inventory requirements Less resource use during the job.

SBBBL is manufacturing Double Side Taper Flat Bright Bar in Taper Edge as per Customer’s requirement like Self Edge, Round Corner Edge, and Drawn Edge etc.

Size Available: 3mm X 2 mm to 32mm X 25mm in Metric and Imperial Scale. Larger Sizes can be produced as on request

 

Yes ! I am Interested

Special Two Side Chamfer Flat Bright Bar

After a deep study of no. of Door Handle Manufacturers, SBBBL developed SPECIAL TWO SIDE CHAMFER FLAT BRIGHT BAR.

Advantages of Special Two Side Chamfer Flat Bright Bar: Saves Slotting Expense Provides better Finishing Ready to use for bulk production.

Special Two Side Chamfer Flat Bright Bar Is Developed From Wire Rod In Low Carbon, Special Low Hardness And Soft Material.

Special Two Side Chamfer Flat Bright Bar Is  Available in Size  8 X 4 X 4 mm or in any Size as required by customers

Types of Edges: Self Edge, Round Corner Edge, and Drawn Edge.

Yes ! I am Interested

Strip Bright Bar

Shri Bhagavati Bright Bars Ltd is manufacturing Strip Bright Bar from basic prime raw material of Wire Rod. It can be manufactured in different Size, Grade, and Length as per customer’s requirement in coils or in bars.

SBBBL manufactures high quality Strip Bright Bar in Mild Steel, Alloy Steel, Stainless Steel, File Steel, etc, as per IS, BS, DIN, AISI, specifications for engineering applications.

During production, continuous inspections are conducted in order to achieve highly accurate dimensions and desired edge forms.

 Types of Strip Bright Bar –
  • From wire rod to strip (Size limitation up to maximum 25mm width)
  • Hot rolled strip/Coil to cold drawn strip (25mm and above up to 150mm, thickness maximum 9mm)

 

Yes ! I am Interested

Round Corner Flat Bright Bar

After an in-depth study of a number of Door Closer Manufacturers, SBBBL developed ROUND CORNER FLAT BRIGHT BAR.

Advantages of Round Corner Flat Bright Bar: Saves Machining cost & Tooling cost Punching& Bending Cost Buffing cost for better surface finishing of Door Closer.

It facilitates smoother movement of door.

The product is developed from wire rod in low carbon, special low hardness and soft material.

Available Sizes: 25 X 5, 20 X 5, 16 X 5, 16 X 4, 20.5 x 4.25mm etc.

Types of Edges: Self Edge, Round Corner Edge, and Drawn Edge etc.

Yes ! I am Interested

Square Bright Bars

Shri Bhagavati Bright Bars Limited can manufacture, supply and deliver Bright Bars & Wires throughout INDIA.

Key Steel is an Unalloyed Medium Carbon Steel with reasonable tensile strength. It is supplied as Bright Cold Drawn Steel in Flat and Square Sections conforming to the specific requirements of our Customers. After an in-depth study of a number of key manufacturing units, SBBBL developed KEY WAY BRIGHT BAR that saves Machining cost and grinding cost of Key manufacturers.

SBBBL manufactures KEY WAY BRIGHT BARS in various sizes like: 8.1X7.1, 8.05 X 7.05, 45.4 X 25.4, 16.5 X 10.5 and in metric (Minus) & in Imperial (Plus) i.e. any ± sizes. SBBBL can supply in ± 0.05 tolerance.

SBBBL manufactures Key Way Bright Bars in various Grades like En6, En6A, En8, En8D, En9, C45, C40, En24,En19, SS410, SS304, SS316, and SS316L also in SAE 1010 to 1055, SAE4140 from basic raw material of Wire rod. 

Customer can save from our material:
  • Grinding labour cost 
  • Deburring cost
  • Material cost 
  • Processing time 
  • Chamfer/ Camber as per requirement up to 20
  • No sign of corrosion, Dent mark, Scratches, Cracks, Waviness, Crease, scale, edge damage

 

Yes ! I am Interested

Key Way Bright Bar

Shri Bhagavati Bright Bars Limited can develop Double Side Taper Flat Bright Bar which gives immense advantages as followed: Saving of Machining cost, Tooling cost, Saving Labour Costs Reduction of Waste during manufacturing, Saving of Time Ready for Production Set up/ ready To Use Low Inventory requirements Less resource use during the job.

 SBBBL is manufacturing Double Side Taper Flat Bright Bar in Taper Edge as per Customer’s requirement like Self Edge, Round Corner Edge, and Drawn Edge etc. Size Available: 3mm X 2 mm to 32mm X 25mm in Metric and Imperial Scale.

 Larger Sizes can be produced as on request

Yes ! I am Interested

Oval Shape Cold Drawn Bright Bar

Shri Bhagavati Bright Bars Ltd is manufacturing Oval Shape Bright Bar as per requirement of Customer’s in different Grades & customised Sizes as per design & drawing.

It can be made available in Straight Length and also in Coil Form.

Yes ! I am Interested

Quarter Round Profile Bright Bar

Shri Bhagavati Bright Bars Ltd has over the years developed expertise in manufacturing Custom and Profile Bright Bars, with the aim of reducing the labor cost, machining cost, inventory turnaround time; increasing the margins; and replacing the expensive methods of Investment Casting whilst providing a superior quality material.

We manufacture such bars through the Cold Drawing and Cold Rolling processes. With such process we provide material with superior finish, precise tolerances, required hardness and suiting the particular end-use of the customers. 

We have developed a wide range of Quarter Round Profile Bright Bar which is used in diverse industrial sectors ranging from Electrical Industries and much more.

Sizes developed by us  as per customers requirement are as available:

  • 20 x 10
  • 25 x 10
  • 35 x 10 

 

Yes ! I am Interested

Snip Shape Profile Bright Bar

Shri Bhagavati Bright Bars Limited can manufacture, supply and deliver Bright Bars throughout INDIA.

Steel is an Unalloyed Medium Carbon Steel with reasonable tensile strength. It is supplied as SNIP SHAPED BRIGHT BARS  conforming to the specific requirements of our Customers. After an in-depth study of a number of key manufacturing units, SBBBL developed SNIP SHAPED BRIGHT BARS that saves Machining cost and grinding cost of Key manufacturers.

Snip Shaped Bright Bars is specially used in machines such as printers and other machines.

 

Yes ! I am Interested

Slope Shape Profile Bright Bar

Double Side Taper Flat Bright Bar

Grooved Square Bright Bar

We at Shri Bhagavati Bright Bars are manufacturing Grooved Square Bright Bars in various sizes which can be directly used by our customers to save the machining steps, machining time, while improving yields and productivity.

Yes ! I am Interested

Engraved Flat Bright Bar

On looking forward with the customers critical conditions we at Shri Bhagavati Bright Bars Limited are manufacturing a wide range of Engraved Flat Bright Bar from high grade & quality raw materials.

This product is 100% custom made. It can be made available in Straight Length & also in Coil Form.

Yes ! I am Interested

Elevator Profile Bright Bar

Shri Bhagavati Bright Bars Limited is bringing up with wide range of Elevator Profile Bright Bar from high grade & prime quality raw materials which can be directly used by our customers to save Time Cost, Labour Cost, Machining Cost, etc.

SBBBL is manufacturing Elevator Profile Bright Bar as per Customer’s requirements in different Grades & customised Sizes.

It can be made available in Straight Length & also in Coil Form.

Also known as Guide rails; the manufactured profile is known for its superior quality &finish.

Yes ! I am Interested

One Side Up Nut Profile Bright Bar

We at Shri Bhagavati Bright Bars Limited are engaged with the quality basis terms with the prime steel sourced from the mills  such as RINL-VSP, JSW, PANCHMAHAL, etc.

And thus as per quality basis we are manufacturing One Side Up Nut Profile as per Customer’s requirement in different Grades & customised Sizes.

 It can be made available in Straight Length & also in Coil Form.

Advantage:
  • Ready to use
  • Reduced machining cost
  • Reduced processing time
  • Getting required corners & edges 
  • Getting Close Tolerance
  • Bright Surface 
  • Bright Finish
Yes ! I am Interested

Round Corner Flat Bright Bar

Special Two Side Chamfer Flat Bright Bar

After a deep study of no. of Door Handle Manufacturers, SBBBL developed SPECIAL TWO SIDE CHAMFER FLAT BRIGHT BAR.

Advantages of Special Two Side Chamfer Flat Bright Bar: Saves Slotting Expense Provides better Finishing Ready to use for bulk production.

Special Two Side Chamfer Flat Bright Bar Is Developed From Wire Rod In Low Carbon, Special Low Hardness And Soft Material.

Special Two Side Chamfer Flat Bright Bar Is Available in Size  8 X 4 X 4 mm or in any Size as required by customers

Types of Edges: Self Edge, Round Corner Edge, and Drawn Edge.

Yes ! I am Interested

Round Bright Bars

Shri Bhagavati Bright Bars Ltd is manufacturing Round Bright Bar from basic prime raw material of Wire Rod. It can be manufactured in different Size, Grade, and Length as per customer’s requirement.

During production, continuous inspections are conducted in order to achieve highly accurate dimensions and desired edge forms.

Round Bright Bars are available in various different Grades as follows:

SAE1010, SAE1018, SAE4140, SAE8620, SAE 52100, EN8D, EN9, EN31, EN18D, EN1A/EN1A Leaded, SS410, SS416, SS420, SS304, SS316.

Different types of sizes are available at Shri Bhagavati Bright Bars starting from 3mm to 40mm in various lengths. For the customers who are in search of odd size or the special sizes such as 10.7mm in 3250mm length we can provide the same.

Yes ! I am Interested

Hexagon Bright Bars

Shri Bhagavati Bright Bars Ltd is manufacturing Hexagon Bright Bar from basic prime raw material of Wire Rod. It can be manufactured in different Size, Grade, and Length as per customer’s requirement.

During production, continuous inspections are conducted in order to achieve highly accurate dimensions and desired edge forms.

Hexagon Bright Bars are available in various different Grades as follows:

SAE1010, SAE1018, SAE4140, SAE8620, SAE 52100, EN8D, EN9, EN31, EN18D, EN1A/EN1A Leaded, SS410, SS416, SS420, SS304, SS316.

We provide hexagon bars in wide range of sizes and lengths.

 

Yes ! I am Interested